Hikoki 305mm (12″) Slide Compound Miter Saw | Model : C12RSH2

Features : 

Compact slide system with large cutting capacity

features a fixed rail slide design that eliminates the need for rear clearance to accommodate the extension of the sliding rails. This system allows the saw to sit up against a wall or to be placed in tight work areas without compromising cutting capacity.

630mm wide base

54mm wider than the previous model C12RSH

Sliding sub-fence

high enough to support large work pieces for stable cutting

27kg in weight (without the cord)

2kg lighter than the previous model C12RSH

Laser marker

The laser casts a line over the whole cutting width
The image at right is for illustration purposes. How it looks will depend on the environmental brightness and cut material.

The laser line can be shifted by turning the adjuster
Dual bevel: left/right 45°

The dual bevel feature allows cuts in both directions without the need for flipping the workpiece over, which makes the job faster.

Positive stops

for quick and easy miter angle setting

Specifications : 

Capacity : 

Blade Diameter : 305mm (12″) 
Cross Cut 0 Degree (H x W) : 105 x 312mm (4-1/8″ x 12-1/4″) 
Miter Left/Right 45 Degree (H x W) : 105 x 220mm (4-1/8″ x 8-5/8″) 
Bevel Left 45 degree (H x W) : 68 x 312mm (2-5/8″ x 12-1/4″)
Bevel Right 45 degree (H x W) : 43 x 312mm (1-11/16″ x 12-1/4″)
Bevel (Left) 45 degree + Miter (left) 45 degree (H x W) : 68 x 220mm (2-5/8″ x 8-5/8″)
Bevel (left) 45 degree +Miter (right) 31 degree (H x W) : 68 x 265mm (2-5/8″ x 10-7/16″)
Bevel (Right) 45 degree + Miter (right) 45 degree (H x W) : 43 x 220mm (1-11/16″ x 8-5/8″)
Bevel (right) 45 degree + Miter (left) 31 degree (H x W) : 43 x 265mm (1-11/16″ x 10-7/16″)

Power Input : 1,520W
No Load Speed : 4,000 rpm
Miter Angle : 

Right : 0 – 57 degree
Left : 0 – 45 degree

Bevel Angle : 

Right : 0 – 45 degree
Left : 0 – 45 degree

Positive Miter Angle Stops : 0 , 15 , 22.5 , 31.6 , 45 degree
Dimensions (L x W x H) : 655 x 890 x 724mm 
Weight : 27kg (without the cord)

Standard Accessories : 

Blade
Dust Bag
Vise Assembly
Box Wrench
Holder